In this article we look at an accelerometer – this time its the MSA301 and we will connect it to our Raspberry Pi and show how to get readings from it using python Lets look at some information regarding the sensor, this is from the…
In this example we look at the MMA7660FC accelerometer connected to a Raspberry pi The MMA7660FC is a digital output I²C, very low-power, low-profile capacitive micro-machined accelerometer featuring a low pass filter, compensation for zero-g offset and gain errors and conversion to six-bit digital values at…
The LIS2DH is an ultra low-power high performance three-axis linear accelerometer belonging to the “femto” family, with digital I2C/SPI serial interface standard output. The LIS2DH has dynamically user selectable full scales of ±2g/±4g/±8g/±16g and it is capable of measuring accelerations with output data rates from…
The MMA8451 is a low-power accelerometer with 14 bits of resolution, with the following features: Embedded functions with flexible user-programmable options, configurable to two interrupt pins Embedded interrupt functions for overall power savings relieving the host processor from continuously polling data Access to both low-pass filtered…
The MMA7455L is a Digital Output (I2C/SPI), low power, low profile capacitive micromachined accelerometer featuring signal conditioning, a low pass filter, temperature compensation, self-test, configurable to detect 0g through interrupt pins (INT1 or INT2), and pulse detect for quick motion detection. 0g offset and sensitivity…
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Read More